1/43 Windscreens and the like

For special skills and tip to make collecting better
Post Reply
SpeedCat71
Posts: 109
Joined: Sat Nov 21, 2020 1:34 pm

1/43 Windscreens and the like

Post by SpeedCat71 »

Hi all, hope you’re all safe and well.

I’ve been collecting cars for a very long time now and do have a few that I would like to refurbish. The problem i face is these are missing in the majority, their windscreens. I have tried and tried with various plastics to make windscreens but no matter what they just look rubbish. Hardly ever does a scrap car come on eBay or something so I could buy it for the windscreen so I’m proper stuck. I don’t really want to sell the cars as I’ve got big ideas for them, but wondered if anyone knows how to make a custom decent fitting windscreen, or does anyone make them or any advice would be welcome. I’ve tried acetate, plastic bottles, other model windscreens, you name it. The cars are 1/43 Minichamps and Corgi Vanguards Ford Capris. Thanks in advance for any advice

Tom
Posts: 28692
Joined: Fri Aug 23, 2013 9:29 am
Location: The Netherlands

Re: 1/43 Windscreens and the like

Post by Tom »

I've used plastic from packaging with some success in the past, but it never looks quite as good as it did originally.

SpeedCat71
Posts: 109
Joined: Sat Nov 21, 2020 1:34 pm

Re: 1/43 Windscreens and the like

Post by SpeedCat71 »

Tom wrote:
Thu Mar 25, 2021 2:47 am
I've used plastic from packaging with some success in the past, but it never looks quite as good as it did originally.
Yes it never quite works 100% does it.

Alex_W
Posts: 1225
Joined: Wed Apr 03, 2019 3:15 pm
Location: Pennsylvania
Contact:

Re: 1/43 Windscreens and the like

Post by Alex_W »

Jean B. makes them from the glass coverslips that are used on microscope slides. You may want to ask him about his method.

You might also try dipping the plastic ones you've made in Future floor finish and letting them drip dry. It makes plastic model windows look more like real glass.

SpeedCat71
Posts: 109
Joined: Sat Nov 21, 2020 1:34 pm

Re: 1/43 Windscreens and the like

Post by SpeedCat71 »

Alex_W wrote:
Thu Mar 25, 2021 11:36 am
Jean B. makes them from the glass coverslips that are used on microscope slides. You may want to ask him about his method.

You might also try dipping the plastic ones you've made in Future floor finish and letting them drip dry. It makes plastic model windows look more like real glass.
Brilliant thank you. Hopefully Jean B may see this but if not i will message him directly. Going to get some Future too. I have also emailed both manufacturers but not holding out much on that one. It’s so annoying they don’t make spares readily available.
Thanks for the advice.

Tom
Posts: 28692
Joined: Fri Aug 23, 2013 9:29 am
Location: The Netherlands

Re: 1/43 Windscreens and the like

Post by Tom »

Jean's method won't work for curved 'screens, though...

Alex_W
Posts: 1225
Joined: Wed Apr 03, 2019 3:15 pm
Location: Pennsylvania
Contact:

Re: 1/43 Windscreens and the like

Post by Alex_W »

SpeedCat71 wrote:
Thu Mar 25, 2021 2:25 pm
Alex_W wrote:
Thu Mar 25, 2021 11:36 am
Jean B. makes them from the glass coverslips that are used on microscope slides. You may want to ask him about his method.

You might also try dipping the plastic ones you've made in Future floor finish and letting them drip dry. It makes plastic model windows look more like real glass.
Brilliant thank you. Hopefully Jean B may see this but if not i will message him directly. Going to get some Future too. I have also emailed both manufacturers but not holding out much on that one. It’s so annoying they don’t make spares readily available.
Thanks for the advice.
You might also try these sources for parts:

https://modelcarparts.com/

https://www.diecastrecoveries.org.uk/pmaster.htm#TOP

I've used each of them in the past.

Here is a good resource for using Future:

http://www.swannysmodels.com/TheCompleteFuture.html

SpeedCat71
Posts: 109
Joined: Sat Nov 21, 2020 1:34 pm

Re: 1/43 Windscreens and the like

Post by SpeedCat71 »

@Alex_W - Thanks again. That Swannys site is very comprehensive indeed........checked the other sites for parts but nothing doing. The more modern makes like Minichamps etc don’t seem to feature yet on them.

@Tom - Yes, the curvature is the problem. I will just keep trying to fabricate until success :D

Jager
Posts: 15757
Joined: Tue Jun 29, 2010 9:29 am
Location: Perth, Australia

Re: 1/43 Windscreens and the like

Post by Jager »

The Ford Capri has been modelled by many diecast manufactures that you can pick up cheaply under £5.00...Del Prado, Detail Cars, Cararama, Solido etc. It would be interesting to see if any of the windscreens from these cheaper models would fit your Vanguards?

https://www.ebay.co.uk/itm/delprado-1-4 ... Sw4iBf-fum

https://www.ebay.co.uk/itm/Ford-Capri-1 ... SwAK5f~PQD
“Racing is life. Anything before or after is just waiting.” - Steve McQueen

SpeedCat71
Posts: 109
Joined: Sat Nov 21, 2020 1:34 pm

Re: 1/43 Windscreens and the like

Post by SpeedCat71 »

Jager wrote:
Fri Mar 26, 2021 5:07 am
The Ford Capri has been modelled by many diecast manufactures that you can pick up cheaply under £5.00...Del Prado, Detail Cars, Cararama, Solido etc. It would be interesting to see if any of the windscreens from these cheaper models would fit your Vanguards?

https://www.ebay.co.uk/itm/delprado-1-4 ... Sw4iBf-fum

https://www.ebay.co.uk/itm/Ford-Capri-1 ... SwAK5f~PQD
Thanks. Yeah have tried IXO, Detail Cars and Norev. Norev could be a goer but still an expensive way.

Post Reply